3. tilt switch image
Things to Know About the Mercury Tilt Switch

Those tilt switches are actually instruments which may detect the orientation or the inclination. They are actually digital sensors that just turn on or off through tilting to one side and then the other. The tilt switches are actually poorman’s accelerometer and this means that they are affordable, low-power, small and they are also very easy to use. Because the tilt switches function as digital sensors. They aren’t as complex like the accelerometer that may detect more motion as well as orientation. However, the simplicity is actually what makes them really popular for the gadget, the toys and also the other appliances. Discover more

Know that they are made in such cylindrical shape with that conductive free mass inside like that blob of mercury or one or more rolling balls in it. Inside the cavity, you will find two conductive poles which functioned as the switch. When that sensor is being oriented so that its end is downwards, then the mass rolls onto such poles and then shorts them, and this would then act as the switch throw.

Those tilt switches are definitely quite easy to use because the mechanism is just simple. In the cavity, when those sensors are actually tilted to the end of the tube, the ball will then touch the conductive pole and it would make the switch turn on. This kind of schematic actually applies to the most type of those tilt switches. Though the sensitivity might actually depend on the length and also the sensors’ materials. Check it out!

There are different kinds of tilt switches. The very common one is that tilt ball switch. Before, they actually were made of mercury because the blob is dense enough preventing it to bounce and so the switch is not susceptible to such vibrations. However, the mercury is quite hazardous since it is really toxic.

Those tilt switches were used to be created from mercury. The switch is going to open and close the circuit when the mercury blob would touch that electrical pole. There are many designs which include the tube’s length, but they do work very similarly. The tube can also contain inert gas, air or vacuum. When the switch is being tilted in the right direction, the blob would then touch the pole and this also closes the circuit. Tilting such in the other direction that moves the blob away to the poles can open the circuit. View https://www.youtube.com/watch?v=Pe35lfv7ZKA
I BUILT MY SITE FOR FREE USING